TECHNICAL CHARACTERISTICSFunctions:
· Wireless system for regulation control.
· ON/OFF control output to operate the Salt Water Chlorinator.
· Direct connection to the Salt Water Chlorinator power supply.
· Stand-by: alarm display if there is no water flow
at the sensors.
· Mesh filter to protect the pH and chlorine sensors.
· With amperometric sensor for direct chlorine measurement in mg/L (ppm).
· Amperometric sensor for organic and inorganic
free chlorine measurement.
· With 7 bar 6 L/h pump for pH dosing and control.
· Wireless system for regulation control.
· ON/OFF control output to operate the Salt Water Chlorinator.
· Direct connection to the Salt Water Chlorinator power supply.
· Stand-by: alarm display if there is no water flow
at the sensors.
· Mesh filter to protect the pH and chlorine sensors.
· With amperometric sensor for direct chlorine measurement in mg/L (ppm).
· Amperometric sensor for organic and inorganic
free chlorine measurement.
· With 7 bar 6 L/h pump for pH dosing and control.
Components:
· Sensor housing.
· Filter housing receptacle.
· Combined pH electrode.
· Copper-platinum electrode (organic-inorganic free chlorine).
· Flow rate sensor.
· Panel assembly.
Characteristics:
· Digital LCD display.
· Measurement range: from 0 to 14 (pH) and 0 to 10 mg/L (ppm).
· Polypropylene box. IP-65 protection.
· Dimensions: 92 x 180 x 160 mm.
· Power supply: 230 Vac ±10%.
· Consumption: 12W.
· Calibration: manual.
· Temperature: 5 to 60ºC.
· Pressure: 1 bar.
