pH standalone regulator
- Wireless membrane dosing pumps with level sensor
- Proportional dosing
- LCD display with user-friendly menu system and easy calibration
- Programmable dosing alarm and start delay
- Wireless control output for Innowater systems
- Dry contact output
- Programmable contact output: ON/OFF signal or proportional duty cycle (PWM)
- Modbus communication (optional)
Technical features
| pH scale | 0 – 14 |
| pH resolution | pH 0.01 |
| pH calibration | Two points pH4 and pH>7 |
| Pump regulation | PWM |
| Redox scale | 0 – 1000 mV |
| Redox resolution | 1 mV |
| Redox calibration | One point |
| Probe connectors | BNC |
| Supply voltage | 100-240 V AC, 50-60 Hz |
| Power consumption | 20 W |
| Weight | 300 g |
| Dimensions | 220 x 130 x 85 mm |
Diaphragm pump
| Stroke frequency max. | 160 strokes/min |
| Max. flow | 5 l/h at 8 bar, 3 l/h at 10 bar |
| Diaphragm | PTFE |
| Pump head | PVDF-T |
| Valves | Ceramic |
| Weight | 1,5 Kg |
| Dimensions | 170 x 145 x 95 mm |
| Powe supply | 230 VAC, 50-60 Hz |
| Power input | 12 W |
| Protection rating | IP65 |
Included elements *
- Control box
- Membrane wireless dosing pump with level sensor
- pH probe
- Redox probe
- Acid suction hose PVC Crystal 4×6 mm
- Acid injection hose PP 4×6 mm
- Filter-suction weight
- Injection fitting
- Probe holder
- Clamp saddles for 50 mm pipe
- pH4 and pH7 calibration solutions
- Redox calibration solution
*The elements included will depend on the model version: pH, Redox or pH + redox.
Terms and Conditions
Control and dosing:
